802.11b Wireless Serial Port Adapter WiSER2400.IP User Guide www.otcwireless.com
Chapter 3 - Diagnostic and Configuration Utility Overview This chapter describes the functionalities and operations of WiSER2400.IP Diagnostic and C
In general, the main window consists of five panels: Connection and Overall Status, Radio Status, Configuration, Security, and RS232 and WLAN Statist
Figure 3. Radio Status Panels (AP: left; Station: right) In general, the Radio Status Panel displays the firmware version, firmware release date, r
In addition, there are two buttons on this panel. The “Default Setting…” button is to set the Max Bytes/Pkt and End Frame Byte to 6 bytes per packet
RS232 and WLAN Statistics Panel The transmission statistics of the RS232 (COM port) and Wireless Local Area Network (WLAN) is shown in this panel. To
Security Panel This panel shown in Figure 5 enables users to configure security options for the WiSER2400 radios. WiSER2400 supports Wired Equivalent
There are two methods to generate WEP encryption keys. One is to use auto key generation through the Passphrase field, and the other method is to manu
The Manual Entry Key 1/2/3/4 fields accept hexadecimal inputs as the encryption he remaining fields in the Security Panel are described below. a. Den
Chapter 4 - UDP/IP Implementation This section describes how the radio firmware composes RS232 data into UDP packets and sends them out, as well as h
b. UDP header: i. Source Port number = “UDP Port” in the “This Unit” portion in the configuration panel. ii. Destination Port number = “UDP Port” in
WiSER2400.IP Wireless Serial Port Adapter User Guide Copyright Information in this document is subject to change without notice. Complying with all a
Chapter 5 - Troubleshooting Blank Pages Appear When Open the Utility Program It is possibly due to the unavailability of the COM port. Please pay at
Poor Link Quality If the Signal Strength indicator is reasonably high (>20%) and the Link Quality is not zero, but the “Link Quality” stays in the
Technical Support If problems are still not solved, please contact our Technical Support to obtain further assistance. Call: 1-800-770-6698 in USA Cal
Appendix A: Limited Warranty WiSER2400 Hardware The seller warrants to the end user (“Customer”) that this hardware product will be free from defect
Appendix B: Regulatory Compliance FCC Part 15 Declaration of Conformity (DoC) The equipment is confirmed to comply with the requirements of FCC Part
European Community (EC) Directives Conformity and Restrictions This product is in conformity with the protection requirements of EC Council directives
Glossary Access Point An internetworking device that seamlessly connects wired and wireless networks. Access Points combined with a distributed syste
TABLE OF CONTENT CHAPTER 1 - INTRODUCTION... 1 WISER2400.IP WIFI RADIO ...
Chapter 1 - INTRODUCTION WiSER2400.IP is an 802.11b compliant, or WiFi, radio with an RS232 serial interface. The WiSER2400.IP radio takes serial
WiSER2400.IP WiFi Radio Specifications Model WiSER2400.IP Standard 802.11 and 802.11b Host Interface RS232 Frequency 2.4GHz – 2.495GHz RF C
Chapter 2 - INSTALLATION OF WiSER2400.IP Installation of WiSER2400.IP Hardware Standard Hardware Items 1 WiSER2400.IP radio 1 3-foot RS232 –P cable
Status LED’s Power on the WiSER2400 Radio, the LED’s on the front panel should exhibit the following patterns: LED Color Light Blinking Pattern Indi
5
Installation of WiSER2400.IP Software System Requirements For using the WiSER2400.IP Wireless Ethernet Adapter’s utilities software, your computer mus
Comments to this Manuals